Asennus - ZPRO Folded postbase

PBWS

Asennus

Fixing

On timber :

  • CNA4.0 ring shank nails,
  • CSA5.0 screws,
  • Ø8 mm SSH screws,
  • Bolts Ø8 mm.

On concrete :

  • Chemical resin AT-HP

The  distance between the plate and the concrete must be 50 mm maximum.

Installation

Upper part :

Place the post in the postbase,
Secure the post base to the post.

Lower part :

Secure the post base to the post,
Drill the support vertically, to the recommended diameter and depth,
Position the post and finalize the fixing to the ground using sealing,
The column base can also be embedded in the concrete when the latter is poured.

  • PBWS post installation using 4 x CSA connector screws. - ZPRO Folded postbase
    PBWS post installation using 4 x CSA connector screws.
  • PBWS post installation using 2 x SSH hex head screws. - ZPRO Folded postbase
    PBWS post installation using 2 x SSH hex head screws.
  • PBWS beam installation - ZPRO Folded postbase
    PBWS beam installation