SWC

Rakenteellinen uppokantaruuvi puuhun

SWC is a countersunk structural screw designed for load-bearing wood structures. The SWC screw has a milling thread to allow for smoothdriving of the shank. The countersunk head gives flush fitting while allowing the wood members to close up firmly.

Tekniset tiedot

CE-merkitty

Tekninen hyväksyntä

Käyttöluokka 2

Yellow electro-galvanized steel

Indoor

EPD

Fastener Designer

Tuotteen yksityiskohdat

Kuvat

Ominaisuudet

Ominaisuudet:

Ei esiporausta
Korkea vetolujuus
Jyrsitty kierre mahdollistaa sujuvan ajon
Upotettu pää

Material

Teräs - Sähkögalvanoitu keltainen sinkkipinnoite

Sovellus

Application:

Wood to wood

advantage

Upotettu pää, jonka alapuolella on jyrsintäuritukset, voidaan
upottaa puun pintaan, jolloin ulkonäkö on harmoninen.

Leikkuukärjen muotoilu yhdessä avennushylsyosan kanssa takaa tehokkaan ja
sujuvan ruuvauksen ja samalla minimoi
sisäänmenovastuksen ja halkeilun.

Tekniset tiedot

Mitat

Product dimensions

Tuotenro	Item code	NOBB nr.	Gunnebo tuotenro	Fastener dimensions [mm]						Paino [kg]
Tuotenro	Item code	NOBB nr.	Gunnebo tuotenro	d	l	t_fix	d_h	l_g	bit	Paino [kg]
SWC6.0X200	75346	55838894	71979	6	200	130	11.8	70	T-30	0.022
SWC6.0X220	75347	55838932	71980		220	150	11.8	70	T-30	0.025
SWC6.0X240	75348	55838913	71991		240	170	11.8	70	T-30	0.027
SWC6.0X260	75349	55838943	71992		260	190	11.8	70	T-30	0.029
SWC6.0X280	75350	55838924	71993		280	190	11.8	70	T-30	0.031
SWC6.0X300	75351	55838905	71994		300	230	11.8	70	T-30	0.033
SWC8.0X80	75352	55836374	76789	8	80	30	14.6	50	T-40	0.018
SWC8.0X100	75353	55836366	71996		100	50	14.6	50	T-40	0.023
SWC8.0X120	75354	55836298	71997		120	40	14.6	80	T-40	0.027
SWC8.0X140	75355	55836385	71998		140	60	14.6	80	T-40	0.031
SWC8.0X160	75356	55836253	71999		160	80	14.6	80	T-40	0.035
SWC8.0X180	75357	55836393	72000		180	100	14.6	80	T-40	0.039
SWC8.0X200	75358	55836321	76781		200	120	14.6	80	T-40	0.043
SWC8.0X220	75359	55836317	76783		220	140	14.6	80	T-40	0.047
SWC8.0X240	75360	55836245	76784		240	160	14.6	80	T-40	0.051
SWC8.0X260	75361	55836340	76785		260	180	14.6	80	T-40	0.055
SWC8.0X280	75362	55836302	76786		280	200	14.6	80	T-40	0.06
SWC8.0X300	75363	55836272	76787		300	220	14.6	80	T-40	0.064
SWC8.0X320	75364	55836336	76788		320	240	14.6	80	T-40	0.068
SWC8.0X340	75365	55836355	72008		340	260	14.6	80	T-40	0.072
SWC8.0X360	75366	55836264	72009		360	280	14.6	80	T-40	0.076
SWC8.0X380	75367	55836283	72010		380	300	14.6	80	T-40	0.08
SWC8.0X400	75368	55836234	72011		400	320	14.6	80	T-40	0.084
SWC10.0X100	76916	60019777	76922	10	100	50	17.8	50	T-40	0.034
SWC10.0X120	76917	60019778	76923		120	70	17.8	50	T-40	0.04
SWC10.0X140	76918	60019779	76924		140	60	17.8	80	T-40	0.046
SWC10.0X160	75369	55838803	76769		160	80	17.8	80	T-40	0.052
SWC10.0X180	75370	55838818	72013		180	100	17.8	80	T-40	0.058
SWC10.0X200	75371	55838822	76770		200	120	17.8	80	T-40	0.064
SWC10.0X220	75372	55838837	76771		220	140	17.8	80	T-40	0.07
SWC10.0X240	75373	55838765	76775		240	160	17.8	80	T-40	0.076
SWC10.0X260	75374	55838841	76776		260	180	17.8	80	T-40	0.082
SWC10.0X280	75375	55838856	76778		280	200	17.8	80	T-40	0.088
SWC10.0X300	75376	55838773	76780		300	220	17.8	80	T-40	0.094
SWC10.0X320	75377	55836226	72185		320	240	17.8	80	T-40	0.1
SWC10.0X340	75378	55838784	72020		340	260	17.8	80	T-40	0.11
SWC10.0X360	75379	55838860	72021		360	280	17.8	80	T-40	0.11
SWC10.0X380	75380	55838875	72022		380	300	17.8	80	T-40	0.12
SWC10.0X400	75381	55838792	72023		400	320	17.8	80	T-40	0.12

Product characteristic properties

Tuotenro	Product characteristic properties
Tuotenro	Characteristic Yield Moment – M_y,k [M_y.k] [Nm]	Characteristic withdrawal parameter - f_ax,k,90° [f_ax.k.90°] [N/mm²]	Characteristic head pull-through parameter - f_head,k [f_head.k] [N/mm²]	Characteristic tensile capacity - f_tens,k [f_tens.k] [kN]	Characteristic torsional strength - f_tor,k [f_tor.k] [Nm]	Torsonial ratio
SWC6.0X200	10.5	13	11.9	12.3	11	≥ 1,5
SWC6.0X220	10.5	13	11.9	12.3	11	≥ 1,5
SWC6.0X240	10.5	13	11.9	12.3	11	≥ 1,5
SWC6.0X260	10.5	13	11.9	12.3	11	≥ 1,5
SWC6.0X280	10.5	13	11.9	12.3	11	≥ 1,5
SWC6.0X300	10.5	13	11.9	12.3	11	≥ 1,5
SWC8.0X80	25.9	12.6	12.5	23.7	27.4	≥ 1,5
SWC8.0X100	25.9	12.6	12.5	23.7	27.4	≥ 1,5
SWC8.0X120	25.9	12.6	12.5	23.7	27.4	≥ 1,5
SWC8.0X140	25.9	12.6	12.5	23.7	27.4	≥ 1,5
SWC8.0X160	25.9	12.6	12.5	23.7	27.4	≥ 1,5
SWC8.0X180	25.9	12.6	12.5	23.7	27.4	≥ 1,5
SWC8.0X200	25.9	12.6	12.5	23.7	27.4	≥ 1,5
SWC8.0X220	25.9	12.6	12.5	23.7	27.4	≥ 1,5
SWC8.0X240	25.9	12.6	12.5	23.7	27.4	≥ 1,5
SWC8.0X260	25.9	12.6	12.5	23.7	27.4	≥ 1,5
SWC8.0X280	25.9	12.6	12.5	23.7	27.4	≥ 1,5
SWC8.0X300	25.9	12.6	12.5	23.7	27.4	≥ 1,5
SWC8.0X320	25.9	12.6	12.5	23.7	27.4	≥ 1,5
SWC8.0X340	25.9	12.6	12.5	23.7	27.4	≥ 1,5
SWC8.0X360	25.9	12.6	12.5	23.7	27.4	≥ 1,5
SWC8.0X380	25.9	12.6	12.5	23.7	27.4	≥ 1,5
SWC8.0X400	25.9	12.6	12.5	23.7	27.4	≥ 1,5
SWC10.0X100	43.7	12.2	11.2	33.8	48.9	≥ 1,5
SWC10.0X120	43.7	12.2	11.2	33.8	48.9	≥ 1,5
SWC10.0X140	43.7	12.2	11.2	33.8	48.9	≥ 1,5
SWC10.0X160	43.7	12.2	11.2	33.8	48.9	≥ 1,5
SWC10.0X180	43.7	12.2	11.2	33.8	48.9	≥ 1,5
SWC10.0X200	43.7	12.2	11.2	33.8	48.9	≥ 1,5
SWC10.0X220	43.7	12.2	11.2	33.8	48.9	≥ 1,5
SWC10.0X240	43.7	12.2	11.2	33.8	48.9	≥ 1,5
SWC10.0X260	43.7	12.2	11.2	33.8	48.9	≥ 1,5
SWC10.0X280	43.7	12.2	11.2	33.8	48.9	≥ 1,5
SWC10.0X300	43.7	12.2	11.2	33.8	48.9	≥ 1,5
SWC10.0X320	43.7	12.2	11.2	33.8	48.9	≥ 1,5
SWC10.0X340	43.7	12.2	11.2	33.8	48.9	≥ 1,5
SWC10.0X360	43.7	12.2	11.2	33.8	48.9	≥ 1,5
SWC10.0X380	43.7	12.2	11.2	33.8	48.9	≥ 1,5
SWC10.0X400	43.7	12.2	11.2	33.8	48.9	≥ 1,5