SWW

SWW Structural Washer Head Wood Screw

SWW is a washer head structural screw designed for load-bearing wood structures. The SWW screw has a milling thread to allow for smooth driving of the shank. The large washer head gives high head pull-through resistance while allowing the wood members to close up firmly.

Tekniset tiedot

CE-merkitty

Tekninen hyväksyntä

Käyttöluokka 2

Yellow electro-galvanized steel

Indoor

Solid Wood

Tuotteen yksityiskohdat

Kuvat

Ominaisuudet

Features:

No pre-drilling required
Washer Head creates high pull through resistance
Milling thread (Reamer) allows smooth driving & reduces installation torque
Washer head
Type 17 point

Material

Steel - Electrogalvanised yellow zinc coating

Sovellus

Applications

Wood to wood

advantage

The disc head enlarges the contact surface and ensures a higher
ensures a higher head pull-through resistance as well as a greater
load transmission.
The cutting tip design in conjunction with the reaming shank
efficient and smooth screwing with simultaneous minimization of the
minimizing the insertion resistance and reducing the splitting effect.

Tekniset tiedot

Mitat

Product dimensions

Tuotenro	Item code	NOBB nr.	Gunnebo art. nr.	Fastener dimensions [mm]						Qty/blister
Tuotenro	Item code	NOBB nr.	Gunnebo art. nr.	d	l	t_fix	d_h	l_g	bit	Qty/blister
SWW6.0X60	75382	55838614	76652	6	60	20	14	42	T-30	-
SWW6.0X80	75383	55838633	72076		80	30	14	50	T-30	-
SWW6.0X100	75384	55838595	72077		100	30	14	70	T-30	-
SWW6.0X120	75385	55838606	72078		120	60	14	70	T-30	-
SWW6.0X140	75386	55838576	72079		140	70	14	70	T-30	-
SWW6.0X160	75387	55838580	76712		160	90	14	70	T-30	-
SWW6.0X180	75388	55838625	72101		180	110	14	70	T-30	-
SWW6.0X200	75389	55838652	76713		200	130	14	70	T-30	-
SWW6.0X220	75390	55838561	76715		220	150	14	70	T-30	-
SWW6.0X240	75391	55838663	76716		240	170	14	70	T-30	-
SWW6.0X260	75392	55838644	76718		260	190	14	70	T-30	-
SWW6.0X280	75393	55838678	76614		280	210	14	70	T-30	-
SWW6.0X300	75394	55838682	76651		300	230	14	70	T-30	-
SWW8.0X80	75395	55838345	72108	8	80	30	22.2	50	T-40	-
SWW8.0X100	75396	55838398	72109		100	50	22.2	50	T-40	-
SWW8.0X120	75397	55838402	72110		120	40	22.2	80	T-40	-
SWW8.0X140	75398	55838334	72111		140	60	22.2	80	T-40	-
SWW8.0X160	75399	55838277	72112		160	80	22.2	80	T-40	-
SWW8.0X180	75400	55838262	72113		180	100	22.2	80	T-40	-
SWW8.0X200	75401	55838296	72114		200	120	22.2	80	T-40	-
SWW8.0X220	75402	55838383	72115		220	140	22.2	80	T-40	-
SWW8.0X240	75403	55838315	72116		240	160	22.2	80	T-40	-
SWW8.0X260	75404	55838364	72117		260	180	22.2	80	T-40	-
SWW8.0X280	75405	55838372	72118		280	200	22.2	80	T-40	-
SWW8.0X300	75406	55838326	72119		300	220	22.2	80	T-40	-
SWW8.0X320	75407	55838353	72120		320	240	22.2	80	T-40	-
SWW8.0X340	75408	55838417	72121		340	260	22.2	80	T-40	-
SWW8.0X360	75409	55838300	72122		360	280	22.2	80	T-40	-
SWW8.0X380	75410	55838281	72123		380	300	22.2	80	T-40	-
SWW8.0X400	75411	55838421	72124		400	320	22.2	80	T-40	-
SWW10.0X100	76912	60019768	76919	10	100	50	25.9	50	T-40	-
SWW10.0X120	76913	60019769	76920		120	70	25.9	50	T-40	-
SWW10.0X140	76914	60019770	76921		140	60	25.9	80	T-40	-
SWW10.0X160	75412	55838436	72125		160	80	25.9	80	T-40	-
SWW10.0X180	75413	55838440	72126		180	100	25.9	80	T-40	-
SWW10.0X200	75414	55838455	72127		200	120	25.9	80	T-40	-
SWW10.0X220	75415	55838466	72128		220	140	25.9	80	T-40	-
SWW10.0X240	75416	55838474	72129		240	160	25.9	80	T-40	-
SWW10.0X260	75417	55838485	72130		260	180	25.9	80	T-40	-
SWW10.0X280	75418	55838493	72131		280	200	25.9	80	T-40	-
SWW10.0X300	75419	55838504	72132		300	220	25.9	80	T-40	-
SWW10.0X320	75420	55838512	72134		320	240	25.9	80	T-40	-
SWW10.0X340	75421	55838523	72135		340	260	25.9	80	T-40	-
SWW10.0X360	75422	55838538	72136		360	280	25.9	80	T-40	-
SWW10.0X380	75423	55838542	72137		380	300	25.9	80	T-40	-
SWW10.0X400	75424	55838557	72138		400	320	25.9	80	T-40	-

Product characteristic properties

Tuotenro	Product characteristic properties
Tuotenro	Characteristic Yield Moment – M_y,k [Nm]	Characteristic withdrawal parameter - f_ax,k,90° [N/mm²]	Characteristic head pull-through parameter - f_head,k [N/mm²]	Characteristic tensile capacity - f_tens,k [kN]	Characteristic torsional strength - f_tor,k [Nm]	Torsonial ratio
SWW6.0X60	10.5	13	16.1	12.3	11	≥ 1,5
SWW6.0X80	10.5	13	16.1	12.3	11	≥ 1,5
SWW6.0X100	10.5	13	16.1	12.3	11	≥ 1,5
SWW6.0X120	10.5	13	16.1	12.3	11	≥ 1,5
SWW6.0X140	10.5	13	16.1	12.3	11	≥ 1,5
SWW6.0X160	10.5	13	16.1	12.3	11	≥ 1,5
SWW6.0X180	10.5	13	16.1	12.3	11	≥ 1,5
SWW6.0X200	10.5	13	16.1	12.3	11	≥ 1,5
SWW6.0X220	10.5	13	16.1	12.3	11	≥ 1,5
SWW6.0X240	10.5	13	16.1	12.3	11	≥ 1,5
SWW6.0X260	10.5	13	16.1	12.3	11	≥ 1,5
SWW6.0X280	10.5	13	16.1	12.3	11	≥ 1,5
SWW6.0X300	10.5	13	16.1	12.3	11	≥ 1,5
SWW8.0X80	25.9	12.6	10.5	23.7	27.4	≥ 1,5
SWW8.0X100	25.9	12.6	10.5	23.7	27.4	≥ 1,5
SWW8.0X120	25.9	12.6	10.5	23.7	27.4	≥ 1,5
SWW8.0X140	25.9	12.6	10.5	23.7	27.4	≥ 1,5
SWW8.0X160	25.9	12.6	10.5	23.7	27.4	≥ 1,5
SWW8.0X180	25.9	12.6	10.5	23.7	27.4	≥ 1,5
SWW8.0X200	25.9	12.6	10.5	23.7	27.4	≥ 1,5
SWW8.0X220	25.9	12.6	10.5	23.7	27.4	≥ 1,5
SWW8.0X240	25.9	12.6	10.5	23.7	27.4	≥ 1,5
SWW8.0X260	25.9	12.6	10.5	23.7	27.4	≥ 1,5
SWW8.0X280	25.9	12.6	10.5	23.7	27.4	≥ 1,5
SWW8.0X300	25.9	12.6	10.5	23.7	27.4	≥ 1,5
SWW8.0X320	25.9	12.6	10.5	23.7	27.4	≥ 1,5
SWW8.0X340	25.9	12.6	10.5	23.7	27.4	≥ 1,5
SWW8.0X360	25.9	12.6	10.5	23.7	27.4	≥ 1,5
SWW8.0X380	25.9	12.6	10.5	23.7	27.4	≥ 1,5
SWW8.0X400	25.9	12.6	10.5	23.7	27.4	≥ 1,5
SWW10.0X100	43.7	12.2	10.2	33.8	48.9	≥ 1,5
SWW10.0X120	43.7	12.2	10.2	33.8	48.9	≥ 1,5
SWW10.0X140	43.7	12.2	10.2	33.8	48.9	≥ 1,5
SWW10.0X160	43.7	12.2	10.2	33.8	48.9	≥ 1,5
SWW10.0X180	43.7	12.2	10.2	33.8	48.9	≥ 1,5
SWW10.0X200	43.7	12.2	10.2	33.8	48.9	≥ 1,5
SWW10.0X220	43.7	12.2	10.2	33.8	48.9	≥ 1,5
SWW10.0X240	43.7	12.2	10.2	33.8	48.9	≥ 1,5
SWW10.0X260	43.7	12.2	10.2	33.8	48.9	≥ 1,5
SWW10.0X280	43.7	12.2	10.2	33.8	48.9	≥ 1,5
SWW10.0X300	43.7	12.2	10.2	33.8	48.9	≥ 1,5
SWW10.0X320	43.7	12.2	10.2	33.8	48.9	≥ 1,5
SWW10.0X340	43.7	12.2	10.2	33.8	48.9	≥ 1,5
SWW10.0X360	43.7	12.2	10.2	33.8	48.9	≥ 1,5
SWW10.0X380	43.7	12.2	10.2	33.8	48.9	≥ 1,5
SWW10.0X400	43.7	12.2	10.2	33.8	48.9	≥ 1,5