KEM V

Vinylester High Strength Anchoring Adhesive with Seismic Certification

KEM V is a high performance vinylester anchoring adhesive for heavy-duty structural fixings in seismic areas.
This formula provides high performances when anchoring threaded rods and rebar in cracked and uncracked concrete as well as in masonry.
Working temperature: from -40 up to +120°C short period and from -40 up to +72°C long period.

Tekniset tiedot

Tekninen hyväksyntä

Seismic C1 C2

Tuotteen yksityiskohdat

Kuvat

Ominaisuudet

Material

Vinylester

Sovellus

Applications

Steel constructions
Wood to concrete structural fixings
Industrial construction
Steel and metal construction (railings, brackets, etc.)
Anchorages for gates and machines
Post-installed rebar connections

Suitable for

Threaded rods and rebar in cracked and uncracked concrete
Threaded rods in masonry
Suitable base materials:
Concrete
Solid brick
Honeycomb
Cell like clay brick
Light weight honeycomb brick
Hollow dense aggregate block
Hollow light aggregate block
Aerated concrete (partially suitable)
Solid stone1)
Wood
1) For application on natural stone or marble, carry out test and wait 24/48 hours for any reactions

For installation instructions and information please refer to Technical Documents.

Asennus

Reference

Advantages

Excellent mechanical and thermal characteristics
Seismic performance C1
High chemical resistance suitable in highly aggressive atmospheres
Suitable for damp concrete and flooded holes
Minimum installation temperature -10°C (-20°C for Winter version)
Fire resistance R120

Product features

•   Assessment for C1 Category SEISMIC ZONE according to TR049
•   Assessment ETA-08/0383 for cracked concrete op.1 according to EAD 330499-01-0601
•   Assessment ETA-12/0553 for post-installed rebar connections according to EAD 330087-01-0601
•   Assessment ETA-12/0543 on masonry according to EAD 330076-01-0604
•   Fire resistance
•   Certified for drinking water applications according to NSF/ANSI 61 Standard
•   Temperature range after curing: -40 / +72°C (max 120°C for short period)
•   Water resistant according to EN12390-8 Standard
•   High chemical resistance of bonded resin
•   LEED tested A+

Safety data sheet available on web site www.strongtie.eu/sds